Impact of Jet Apparatus

This apparatus is used to verify the momentum equation experimentally. This is also used for comparison of change in force exerted due to shape of the vane for different targets (Flat or curved).

 A Centrifugal pump of 25mm x 25mm with 1/2 HP Motor
 M.S. SUMP TANK 80 X 33 X 30cm to collect the water.
 M.S. MEASURING TANK 45 X 30 X 30cm fitted with piezometer tube to measure the discharge. Damper is used to collect the water in M.S. MEASURING TANK for certain time.
 G.I. pipe of internal dia 25.4mm (1") and Gunmetal ISI mark Control Valve and regulating valves are us This apparatus is used to verify the momentum Equation experimentally. This is also used for comparison of change in force exerted due to shape of the vane for different targets(Flat or curved).
 Bye-pass line is also used to regulate the discharge.
This apparatus consists of a Perspex cylinder of 6" (152mm) dia with two interchangeable targets (curved and plane). A nozzle of 10mm is fitted to produce jet. A scale is provided on the top to measure the displacement of plate.

Five additional weights of 100 gm. each are also provided. The tanks are well epoxy painted insided to prevent rust hence increase the life of tank.

 To verify the momentum equation experimentally.
 Comparison of change in force exerted due to shape of the vane for different targets (flat or curved).ed to circulate water.